Oakland City Hall

Oakland City Hall
Oakland City Hall (Oakland, CA) 2.JPG
General information
Type Government offices
Location 1 Frank H. Ogawa Plaza
Oakland, California
Coordinates
Construction started 1910
Completed 1914
Height
Roof 97.23 m (319.0 ft)
Technical details
Floor count 18
Design and construction
Owner Oakland, California
Architect Palmer & Hornbostel
Oakland City Hall
Architectural style: Beaux-Arts
Governing body: Government
NRHP Reference#: 83001170
Designated NRHP: September 15, 1983
References
[1][2][3][4]

Oakland City Hall is the seat of government for the city of Oakland, California. The current building was completed in 1914, after its predecessor was destroyed in the 1906 San Francisco earthquake. Standing at the height of 320 feet (98 m), it was the first high-rise government building in the United States.[5] At the time it was built, it was also the tallest building west of the Mississippi River.[6]

The building was designed by New York-based architecture firm Palmer & Hornbostel in 1910, after winning a nation-wide design competition.[5] The building, constructed in the Beaux-Arts style, resembles a "rectangular wedding cake".[5] It consists of three tiers. The bottom tier serves the foundation. It is three-story tall and houses the mayor's office, the city council chamber, hearing rooms, and a police station with a firing range below in the basement. The thinner second tier follows; it is a ten-story tall office tower. The top floor of this section (the 12th floor) houses a 36-cell jail with an outdoor yard that has gone unused since the 1960s.[6] Above the second tier is the two-story tall podium with a clock tower on top.[5] The exterior is built using white granite and terra cotta, while the inside is built using white and black marble.[6] The building was nicknamed "Mayor Mott's wedding cake" after former Oakland Mayor Frank Kanning Mott, a key player in passing the bond to pay for the new City Hall, married the same year construction began.[5][6]

In 1983, the Oakland City Hall was added to the National Register of Historic Places.[4]

After the 1989 Loma Prieta earthquake, the building suffered from major structural damage and was immediately closed down. Instead of tearing it down and replacing with a newer building, city leaders decided to retrofit it seismically. To do so, steel columns in the foundation were cut and they were replaced by rubber bearings. Steel beams were added to support the steel structure and concrete walls were added to support existing walls. The building can now move laterally 18-20 inches in an earthquake. The city hall was repaired along with the downtown revitalization project of building new office buildings. The repair project cost $85 million.[6]

References

External links